The specialized holder for mold cleaning rotates 1/2 mold facing down with a suitable tilt angle of 80° -> cleaning the molds, applying oil to the molds -> returning the molds to their original state -> putting the molds on the longitudinal mold chain conveyor. The specialized holder for cleaning 1/2 mold facing down is
The specialized separating system lifts and rotates the mold at a suitable angle to separate the product from the centrifugal mold. The system combines many stages: raising up to the appropriate height according to each type -> rotating the mold at the appropriate angle -> supporting the product -> putting the product on the
180° mold upside-down system is used to turn the mold upside-down after the product is separated -> putting the mold on the longitudinal mold chain conveyor to carry out cleaning and installation of steel cages. 180° mold upside-down system is used to turn the mold upside-down after being cleaned -> waiting for covering after
Horizontal mold chain conveyor chain system is used to serve the stages of mold transfer for bolting -> tensioning and mold transfer for discharging bolts -> product separation. The system operates completely and continuously according to programmed time in order to create safe and effective conditions for high productivity in the manufacture.
The mold conveyor system is used for mold transfer after the product is separated -> cleaning the mold -> installing the steel cage into the mold -> installing the holder into the mold -> to the position of loading concrete into the mold. The system operates according to programmed time in order to create
It is specialized in separating tube piles from centrifugal molds, creating safety and aesthetics on the product surface, this is the final stage of the manufacturing process Using a vacuum system to separate the product is the most optimal method, it creates a smoothness in the process to minimize cracks, scratches, etc. on the
It is specifically used in clamping centrifugal molds to serve in the manufacture of centrifugal concrete tube pipes (electrical poles), etc... The clamping system (TX) is specialized in combination with the crane to serve the stages of clamping + picking + lifting + lowering + moving the centrifugal molds. Clamping the whole mold with
The specialized clamping and picking system (TX+TF) is used in combination with the crane to serve the stages of clamping + picking + lifting + lowering + moving the centrifugal molds. The most commonly used TX+TF systems: TX+TF for the manufacture of tube piles (electrical poles) D300 ÷ D600, L=14m. TX+TF for the manufacture
After feeding concrete into the mold, the tension machine will be used to prestress the PC Bar or PC Wire steel before going through the centrifugal rotation stage. The machine system operates completely automatically by hydraulic system, which allows setting tension, movement, up and down route, etc. suitable for each type of product. Control
Steel after being cut according to specifications is put into the welding machine to shape the steel core for each type of concrete square piles. The machine system automatically operates, applying Inverter technology in combination with PLC through specialized software in order to have high economic efficiency and maximize labor savings in the manufacturing
