ĐT: (0274) 3 763 785 - Fax: (0274) 3 763 784 - Mobile: 0918.497.590|congnghemaytriviet@yahoo.com.vn

Sản phẩm

HOLDER 80° FOR MOLD CLEANING

By | 2022-06-11T15:32:28+00:00 January 17th, 2010|

The specialized holder for mold cleaning rotates 1/2 mold facing down with a suitable tilt angle of 80° -> cleaning the molds, applying oil to the molds -> returning the molds to their original state -> putting the molds on the longitudinal mold chain conveyor. The specialized holder for cleaning 1/2 mold facing down is

SYSTEM OF LIFTING & SEPARATING PRODUCTS FROM CENTRIFUGAL MOLD

By | 2022-06-11T15:24:06+00:00 January 16th, 2010|

The specialized separating system lifts and rotates the mold at a suitable angle to separate the product from the centrifugal mold. The system combines many stages: raising up to the appropriate height according to each type -> rotating the mold at the appropriate angle -> supporting the product -> putting the product on the

180° MOLD UPSIDE-DOWN SYSTEM

By | 2022-06-11T15:30:08+00:00 January 15th, 2010|

180° mold upside-down system is used to turn the mold upside-down after the product is separated -> putting the mold on the longitudinal mold chain conveyor to carry out cleaning and installation of steel cages. 180° mold upside-down system is used to turn the mold upside-down after being cleaned -> waiting for covering after

HORIZONTAL MOLD CHAIN CONVEYOR

By | 2022-06-11T15:30:57+00:00 January 14th, 2010|

Horizontal mold chain conveyor chain system is used to serve the stages of mold transfer for bolting -> tensioning and mold transfer for discharging bolts -> product separation. The system operates completely and continuously according to programmed time in order to create safe and effective conditions for high productivity in the manufacture.

VACUUM SYSTEM FOR SEPARATING TUBE PILES

By | 2022-06-20T23:01:23+00:00 January 12th, 2010|

It is specialized in separating tube piles from centrifugal molds, creating safety and aesthetics on the product surface, this is the final stage of the manufacturing process Using a vacuum system to separate the product is the most optimal method, it creates a smoothness in the process to minimize cracks, scratches, etc. on the

CLAMPING AND PICKING SYSTEM (TX + TF)

By | 2022-06-11T15:01:48+00:00 January 10th, 2010|

The specialized clamping and picking system (TX+TF) is used in combination with the crane to serve the stages of clamping + picking + lifting + lowering + moving the centrifugal molds. The most commonly used TX+TF systems: TX+TF for the manufacture of tube piles (electrical poles) D300 ÷ D600, L=14m. TX+TF for the manufacture

TENSION MACHINE FOR TUBE PILES AND ELECTRIC POLES

By | 2022-06-11T16:09:32+00:00 January 9th, 2010|

After feeding concrete into the mold, the tension machine will be used to prestress the PC Bar or PC Wire steel before going through the centrifugal rotation stage. The machine system operates completely automatically by hydraulic system, which allows setting tension, movement, up and down route, etc. suitable for each type of product. Control

SQUARE PILE CAGE WELDING MACHINE

By | 2022-06-20T22:48:13+00:00 January 8th, 2010|

Steel after being cut according to specifications is put into the welding machine to shape the steel core for each type of concrete square piles. The machine system automatically operates, applying Inverter technology in combination with PLC through specialized software in order to have high economic efficiency and maximize labor savings in the manufacturing